Product Line

Single facers
Single Facer 22

CSF-22

Single Facer 22

Description
  • This machine is exclusively for the formation of fluting paper and laminating of single facer.
  • The height of this machine can be reached to 200m/min. The production speed also can arrive at 180m/min.30~50HP of the Motor and the speed can be adjusted.
Features
  • As for the fluting type which can be connected with E-B-C-A-F-G flute, we also can make any type of the flute and cut-off size for the machine that customer required.
  • Upper and lower corrugated roller, pressure roller, pre-heater roller are through by air cylinder. Set up steam recovery system.
  • Oil immersed type gear box driven directs the lower fluting roller, pressure roller, glue roller and doctor roller performed by steam. Single drive mechanism to avoid glue sticking to roll surface when stopping.
  • The motion of the upper corrugated roller, pressure roller and glue roller are operated by the hydraulic cylinder. Set up a hydraulic unit control.
  • Designed by fingerless with a vacuum blower by positive pressure to keep fluting profile then glue.
  • The single facer to use cassette quick change flute profile and change cassette within 20 minutes, the steam joints and drive clutch also adopted quick change device in order to saving the time to change flute and machine stop.
Product Specifications
1600mm~~2500mm.
Specification
The wheel diameter ø 360:
  CSF-22-4 CSF-22-5 CSF-22-6 CSF-22-7
Width of paper 1600 1800 2000 2200
The highest speed 220 m/min
The wheel diameter ø 408:
  CSF-22-6 CSF-22-7 CSF-22-8
Width of paper 2000 2200 2500
The highest speed 250 m/min

History
    3Inquiry
    Contact Us